If you’re remodeling in Portland, plan on $9,200–$20,700 for a professionally installed prefab tub-to-shower conversion, $23,000–$36,800 for a standard full hall bath, or $66,700–$112,700 for a primary suite with custom cabinetry and premium finishes. A custom tiled shower has its own budget.
Portland Bathroom Budgets by Scope
| Scope to price | Planning budget |
|---|---|
| Tub to prefab shower in the existing footprint | $9,200–$20,700 |
| Tub to custom tiled shower | $13,800–$20,700 or more |
| Full hall bath with standard cabinetry and fixtures | $23,000–$36,800 |
| Primary suite with custom cabinetry and premium tile or quartz | $66,700–$112,700 |
Each range adds 15% to a comparable published local price range. These are planning figures. The hall and primary benchmarks exclude permit fees and applicable taxes. Confirm inclusions in your written estimate.
Sources: Lamont Bros. conversion pricing · Portland Tile · JDI Construction
What Local Homeowners Actually Spent
Two published Oregon totals show how far the scope can move the price. A West Slope bathroom with a tub-shower and double vanity came to $45,707. A Hillsboro primary suite with slab walls and a freestanding cast-iron tub came to $118,400. Both figures are Woodland Construction Group’s reported job totals.
See the itemized Oregon project budgets
Southeast Portland, Oregon / Five Star Bath SolutionsA Tub-to-Shower Conversion With a Lower Step
The homeowner’s problem was the height of the tub wall. Replacing the entire bathroom would have paid for things that did little to solve it. On this SE Portland project, Five Star Bath Solutions removed a high-sided tub with a molded surround and built a lower-entry shower in the alcove, with a lower shower base, sliding glass and grab bars.
See the before-and-after photos from Five Star Bath Solutions
What the work included
A shower base, full-height wall panels, a recessed niche, a handheld shower, grab bars and a sliding glass enclosure. The published scope centers on the bathing area.
Did the plumbing move?
The shower replaced the tub in its alcove. The project record does not say whether the drain or supply piping moved behind the walls or floor.
How long it took
The installer lists one day for this installation. Its project notes describe a five- to six-week scheduling window. Those are two different clocks if this is the only shower in your house.
What it cost
The installer did not disclose the final price. For a comparable prefab conversion, the Portland planning range in this guide is $9,200–$20,700. Ask whether the enclosure, grab bars and repair of hidden damage are included in the bid.
Portland shower remodeling options
Lake Shore, Vancouver, Washington / Serden GroupA Hall Bath That Gained a Full Wall of Storage
This bathroom across the Columbia had two sinks, but a wall and a doorway separated them. The family already used the hall entrance. We closed the unused bedroom door and removed the partition. That gave us one uninterrupted wall for a double vanity without enlarging the room.
Serden Group project photography. View the full photo gallery
What the work included
Custom stained-wood cabinetry, a quartz top, two sinks, new lighting and hex tile on the floor. The old tub became a walk-in shower with slab walls and a sliding glass door.
Did the plumbing move?
Yes at the vanity. We reworked supplies and drains to bring both sinks onto one wall. The shower stayed in the tub alcove, close to the existing drain and supplies.
What it cost and how long it took
Serden’s published all-in project range is $35,000–$50,000. It covers both the shower and the rest of the room. The case study documents the work sequence but does not give a single invoice total or elapsed construction time.
For an Oregon price comparison, Woodland Construction Group reports $45,707 for its 80-square-foot West Slope main bath with a tub-shower and double vanity. Its two-month figure covers design and construction together.
A Primary Bathroom Built Around a Steam Shower
The old jetted tub sat in a wide tiled deck. It occupied the sunniest corner of the bathroom while the shower beside it had barely enough room to turn around. We removed the deck, moved a freestanding tub into the window corner and used the recovered floor space for a larger shower with a seat.
Serden Group project photography. View the full photo gallery
What the work included
A steam shower with a bench and linear drain, frameless glass, heated porcelain floors and a 72-inch double vanity with a quartz top. The job included the circuits for the steam generator and floor heat.
Did the plumbing move?
Yes. We relocated rough plumbing for the tub, shower and double vanity. The room’s outer walls stayed in place.
What it cost and how long it took
Serden reports an all-in project range of $60,000–$70,000 and six weeks from demolition to final walkthrough. Permits were in place before the six-week clock started. The exact final invoice total is unpublished.
At the higher end, Woodland reports an actual $118,400 total and seven weeks for a 112-square-foot Hillsboro primary suite. Its scope included slab walls, a cast-iron tub and custom walnut cabinetry.
What Changes the Price of Your Bathroom?
Can I remodel a 5-by-8 hall bath for $25,000?
That budget falls inside our standard hall-bath planning range. Start with a stock vanity, one basin, a tub or shower in the existing alcove and a tile allowance you can shop against. A second sink across the room, a custom cabinet or a new toilet location changes the scope. If $25,000 is your ceiling, ask for the base price and each of those upgrades on its own line.
Does keeping the layout save money?
Usually. Draw the existing toilet, shower drain and vanity on a sheet of paper, then mark exactly what you want moved. A new shower valve in the same wall is a different job from moving a toilet drain across the floor. At the Lake Shore house, we kept the shower near the old tub plumbing and spent the plumbing budget where it improved storage and counter space.
Do I need permits for a bathroom remodel in Portland?
Portland requires a plumbing permit for work such as relocating piping or replacing a fixture when concealed plumbing connections are involved. Ask your contractor which permits your scope needs, who will pull them and whether the price includes the fees. A Vancouver example can help you picture the work. Your Portland address determines the permitting office.
City of Portland residential permit guidance
What should I ask before comparing two bids?
Ask each bidder to price the same tile area, vanity, enclosure and plumbing locations. Check whether glass, disposal, ventilation and repairs after demolition have fixed prices or allowances. If you have only one bathroom, ask when the toilet will be usable and when you can take a shower again, and get both dates in writing.
Get a Portland Bathroom Estimate
Tell us which bathroom you want to change, what you want to keep and the budget you want to stay within. At a free walkthrough, Serden Group can measure the room and price the changes that matter to you. A photo from the doorway and one of the current tub or shower are a good place to start.
We answer Mon–Sat, 8am–8pm. Call (360) 836-7775 to schedule your free walkthrough.
Request a Portland bathroom remodeling estimate · Try the Serden bathroom budget calculator




